To make us enjoy a hot water, a whirlpool, hydro-massage, a nice soothing lighting, our outdoor spa must be connected and connected to our power system.
But a circulation pump, a filter, massage jets, a compressor to make bubbles, a heating system, it makes noise! With 2 to 3 HP average power per pump, it is impossible for an outdoor spa to go unnoticed once it has been plugged into the garden. And yes: the noise of operation pumps add vibrations that the device will transmit in the ground, not to mention the rippling water.
The crucial point is that unfortunately for those around us, a spa is noisy even when not in use. The explanation is simple. A spa is not like a vacuum cleaner: it is not disconnected after each use, especially if it is used regularly. For reasons of hygiene and cleanliness, the water must indeed be filtered every day a certain number of hours. When the water is filtered, in addition to the pump, the network of massage jets will also activate every quarter of an hour to prevent water from stagnating. Not to mention the heating system, it is advisable to let it run to save money.
Of course, all that makes noise. Noise nuisance that can be problematic if the house of our neighbors is relatively close to ours, or even terraced. Especially in summer, when everyone likes to enjoy the tranquility of their garden during the day and in the evening.
Even if the whirlpool has noise, you don’t need to worry about it. The noise is very small in hot tub with skirt. Let’s enjoy the spa now.
